TREASORES will demonstrate the production of large area organic electronics using high throughput manufacturing technologies based on roll-to-roll (R2R) wet deposition processes. In particular, by developing large area (>1m2) transparent conducting barrier foils which will be used for the production of flexible organic light-emitting devices (OLED), light-emitting electrochemical devices (LEC) and flexible organic photovoltaics (OPV). This industry-driven project is a sustainable approach towards low cost production of organic thin film optoelectronic devices using low-temperature (25 lm/W for OLED and LEC; Eff.>5%) made from organic semiconductors as well as reliable encapsulation (LEC lifetime>5000h, OLED lifetime >10000h). Testing, reliability validation and disposal issues are an integral part of the project. A key objective is to demonstrate the scale-up of novel flexible, transparent (Tr>90%) and conductive (R< 10 /square) substrates to replace the widespread use of indium tin oxide (ITO). To keep production costs low (190 100cm2) to high throughput production (web speed >1m/min.) without degradation of performance or yield is a key objective of the project. Flexible encapsulation foils shall use the most advanced barrier materials and will be made available in large enough surface area to be compatible with prototype device fabrication on a pilot scale.
Exploitation is ensured by the participation of manufacturers concerned with OLED, LEC and OPV devices, by the clear pathway from laboratory development to pilot production (using the same processes) and by the extensive experience of the academic partners in collaborating with industry.